Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Woodland Hills Owner’s Guide
CGI driveway and paver component replacement in Woodland Hills typically runs $250 to $4,500 installed, depending on whether you need a single paver matched and re-set or a full driveway edge repair. Most owners discover the failure the same way: a paver shifts underfoot, a drain channel separates from the slab, or pooling water starts eating at the driveway edge after a storm. We stock CGI-compatible pavers, edge restraints, and drainage components on our trucks, and we can usually match your existing material on the first visit.
If you’re holding a cracked paver or looking at a driveway that’s slowly sinking at the curb line, this page covers what you actually need to know: how to confirm the part, what it costs in this market, and when you’re better off calling someone like us at (341) 217-2776.
Key Takeaways
- CGI driveway repairs in Woodland Hills range from $250 for a single paver swap to $4,500 for a full edge rebuild with drainage correction.
- We stock CGI-compatible pavers and edge parts; most jobs are completed in one visit.
- We’re an independent service provider, not affiliated with CGI, but we install their components daily.
- Every job gets a written price before work starts, backed by our 365-Day Done Right Promise.
Which CGI Models This Applies To
CGI produces paver systems and driveway components across several product lines, and the compatibility details matter more than most homeowners expect. Their pavers come in different thicknesses, typically 60mm for pedestrian applications and 80mm for vehicle traffic, and the two are not interchangeable. If someone installs a 60mm paver where an 80mm belongs, it cracks within the first year under vehicle weight.
To identify your part, check the underside of a removed paver or the exposed edge of your driveway. CGI stamps most products with a mold code and thickness marking. If you can’t find a stamp, measure the paver thickness with a tape measure through a gap in the edge restraint. For drainage components, look for the CGI channel width stamped on the grate or the channel body itself. When we arrive, we verify these details before quoting, because guessing wrong means a second trip and a paver that never sits flush.
On the OEM versus aftermarket question, we’re straightforward: for structural pieces like edge restraints and drainage channels, we use CGI OEM parts whenever available. For individual pavers, a quality aftermarket equivalent from a local supplier often matches perfectly at a lower price, and we’ll tell you the difference and let you decide.
Styles & brands we work with
Signs Your CGI Driveway & Pavers Is Failing
- Pavers shifting or rocking underfoot: This usually means the edge restraint has failed or was never installed properly. The restraint is what locks the field in place; once it goes, the outer pavers start migrating and the problem spreads inward.
- Water pooling in one section after rain: The base material has settled or washed out beneath the pavers. In Woodland Hills, our clay-heavy soil expands and contracts through wet and dry seasons, which accelerates settlement if the base wasn’t compacted correctly.
- Cracks running across multiple pavers in a line: That’s a structural failure beneath the surface, typically a base issue or a drainage problem undermining the subgrade. Replacing just the cracked pavers won’t fix it; the base needs attention first.
- Drain channel separating from the concrete apron: The channel was likely set without proper bonding or the wrong channel profile for the load. Once water gets underneath, it erodes the bedding and the separation widens.
- Edges crumbling or chipping along the curb line: Repeated tire contact on an unsupported edge will spall the paver surface. This is common on driveways where the edge restraint sits too low or has rusted out entirely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For driveway and paver component work in Woodland Hills, here’s what you’ll see from us:
- Single paver replacement: $250 to $700, including paver match, removal, base touch-up, and re-set.
- Edge restraint repair or replacement: $500 to $1,800 depending on linear feet and whether we’re resetting the outer row.
- Drain channel replacement: $700 to $2,500 installed, depending on channel length and grate type.
- Full driveway edge rebuild with drainage correction: $2,500 to $4,500 when base repair and paver reset are required.
What drives the range is paver availability, how much base material needs recompacting, and whether drainage has to be regraded. Every quote includes parts, labor, and haul-away of the old material. You get a written price before we touch anything, and the number on that quote is the number on the invoice. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right, in writing, for a full year.
DIY or Call Us?
A homeowner can safely check a few things: look for a visible stamp on the paver, measure the thickness, and note where water is pooling. That information helps us quote faster over the phone.
Where DIY goes wrong is base repair and drainage correction. Lifting a paver is easy. Recompacting a settled base without the right equipment means the paver settles again in six months. And regrading drainage against a concrete apron requires cutting, bedding, and setting the channel at the correct slope, which is where we see a lot of well-intentioned weekend jobs turn into our weekday callbacks. This is not high-tension work like garage springs, but it is skilled work. If you’re dealing with anything beyond a single clean paver swap, call (341) 217-2776 and get a written price first.
FAQs
CGI pavers installed on a properly compacted base typically last 25 to 35 years in our climate. The heat and clay soil are hard on the base, not the paver itself. If your base was done right, the pavers will outlive most of the house’s exterior.
Call (341) 217-2776 if your pavers are failing early; that’s a base problem, not a product problem.
A single cracked paver is always replaced, never repaired; paver repair kits don’t survive vehicle traffic. The real question is whether the crack is isolated or a symptom of a failing base beneath.
We’ll tell you which one you have before we quote anything. Call (341) 217-2776 for a free estimate.
A single paver swap takes under two hours. An edge restraint repair takes a half day. A full edge rebuild with drainage correction is a one-day job in most cases.
We give you a live arrival time before we head over, so you’re not sitting through a four-hour window. Call (341) 217-2776 to schedule.
We stock common CGI-compatible pavers, edge restraints, and drain channels on our trucks for Woodland Hills jobs. If we don’t have your exact piece on hand, we source it from a local supplier and usually have it within a day or two.
Send us a photo of the paver and we’ll tell you what we’re looking at. Call (341) 217-2776.
If you’ve got a paver problem on a CGI driveway in Woodland Hills, don’t guess at it. Call (341) 217-2776 for a free estimate. We’ll send a background-checked, uniformed technician to look at it, give you a written price on the spot, and if the job makes sense, we’ll do the work right the first time. The work tells you everything. We just make sure it tells the right story. I’m Luca Romano, and my crew and I have been working the West Valley long enough to know exactly what these driveways need.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
