Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Woodland Hills Owner’s Guide
When a CWS driveway or paver section starts failing, we stock and install compatible replacements throughout Woodland Hills, typically priced between $7,000 and $18,000 for a full paver driveway installation, with smaller repairs running far less. Most homeowners discover the problem after winter rains leave a section sinking or a paver cracking under the heat. You’ll know it when you see it: a low spot collecting water, a shifted edge where the driveway meets the street, or a paver that’s broken clean through. CWS pavers are solid products, but Woodland Hills soil and summer temperatures do things to them over time.
Which CWS Models This Applies To
CWS driveway systems come in a few distinct lines, and the part you need depends on which one was originally installed. The most common CWS paver profiles we see in Woodland Hills are the interlocking concrete pavers in 60mm and 80mm thicknesses, with the 80mm being the standard for driveways that see regular vehicle traffic. The 60mm pavers are fine for walkways and patios, but using them on a driveway is asking for trouble. If you’ve got the original paperwork, look for the paver thickness in millimeters; if you don’t, flip a broken paver over and measure it. The number is usually stamped on the underside.
Here’s the compatibility gotcha: CWS changed their edge restraint profile about eight years ago, so older jobs can’t always take the current stock lengths without trimming. We match the original paver dimensions and color batch as closely as material availability allows. If the exact color is discontinued, we’ll show you the two closest matches before any work starts so you’re not surprised at delivery. As for OEM versus aftermarket, CWS-branded pavers are manufactured to their current specs, but several California suppliers produce equivalent pavers in the same dimensions with better color consistency for older jobs. We’ll make that call with you, not for you.
Sawyer Remodel Woodland Hills is an independent service provider and not affiliated with CWS. We work on their products because we know them, not because we represent them.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Is Failing
- Sinking or low spots that hold water after rain. This points to base material erosion under the pavers. Woodland Hills sits on sandy loam in spots, and when the base washes out from beneath, the pavers drop. That water pooling near your garage is doing damage every time it rains.
- Cracked or split pavers in the wheel track. The two strips where your tires roll every day carry the most load. If the base wasn’t compacted in lifts when the driveway was first installed, those pavers crack under repeated vehicle weight. One cracked paver usually means six more are behind schedule.
- Edge pavers shifting outward near the street or planting beds. Edge restraint failure. The plastic or aluminum edging that holds the outside row of pavers in place gets hit by lawn equipment, tree roots, or just years of lateral pressure. Once the edge goes, the whole field starts to wander.
- Weeds or grass sprouting between paver joints. This means the joint sand is gone and nothing is locking the pavers against each other. The pavers start shifting individually instead of acting as one interlocking unit. In Woodland Hills, the combination of dry summers and the Santa Ana winds strips joint sand faster than most owners expect.
- Paver color fading unevenly or surface flaking (spalling). UV exposure and the occasional hard freeze-thaw cycle during cold winter mornings take a toll. Spalling is when the top layer of the paver literally flakes off like a bad sunburn. Once spalling starts, sealing won’t fix it; the paver has to be replaced.
Replacement Cost & What’s Included
For a full CWS-compatible paver driveway replacement in Woodland Hills, budget between $7,000 and $18,000 depending on square footage, access, and whether the base needs rebuilding or just spot repair. A smaller repair, like replacing a failed section or redoing the edge restraint, typically runs between $1,500 and $5,000. What drives the range? How much excavation is needed, whether we’re reusing existing pavers or sourcing new ones, and how much base material has to be hauled out and rebuilt in compacted lifts.
Every quote we write includes the full breakdown: pavers, base material, edge restraint, joint sand, labor, and haul-away, each as a line item. The number on the invoice is the number you approved. No change orders mid-job unless you ask for additional work. Our 365-Day Done Right Promise covers the installation: if a paver shifts, sinks, or the edge fails within a year, we come back and fix it. No argument, no invoice. That’s the deal we put in writing on every driveway job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the condition of your own driveway: look for low spots, test whether edge pavers wobble under your foot, and note where water sits after the next rain. What you should not do is pull up a section of pavers and start digging. Once you break the interlock and disturb the base, you’ve taken a small repair and turned it into a rebuild. Improperly compacted base material is the number one reason driveway pavers fail again within two years. We’ve re-done enough DIY paver repairs in Woodland Hills to know that the second fix always costs more than the first one would have.
Sawyer Remodel Woodland Hills handles the whole job with the right tools and a crew that’s been laying pavers across the West Valley for years. Luca Romano has seen every driveway failure mode this climate can produce, and the crew knows what the base should look like before the first paver goes down. Call (341) 217-2776 and we’ll come look at what’s going on under the surface.
FAQs
CWS pavers on a properly built base last 25 to 30 years in Woodland Hills, though the surface may need resealing every 3 to 5 years and the joint sand topped off occasionally. The pavers themselves rarely fail first; it’s almost always the base or the edge restraint that goes. Call (341) 217-2776 if you’re seeing movement and we’ll tell you what’s actually failing.
Yes, if the base underneath is still stable and the failure is limited to a few cracked pavers or a failed edge restraint, we can do a targeted repair without tearing out the whole driveway. The key is catching it early before water gets under the field and starts eroding the base. Call (341) 217-2776 for an assessment; we’ll tell you honestly whether a repair makes sense or whether you’re just postponing a replacement.
A small paver repair typically takes one day. A full driveway replacement in Woodland Hills usually runs three to five days, including base excavation, compaction, paver installation, and joint sand. Weather can shift that, but you’ll know the schedule before we start. Call (341) 217-2776 and we’ll give you a realistic timeline for your specific job.
We keep common CWS-compatible paver profiles in 60mm and 80mm, edge restraints, and joint sand on our trucks for repair work. If your job needs a specific color or a profile we don’t have on hand, we order it and schedule your install once it’s in. Call (341) 217-2776 and we’ll confirm what’s available for your exact pavers.
Get a Written Price Before Any Work Starts
If your CWS driveway is failing, the next step is a free estimate that tells you exactly what’s wrong, what it costs to fix, and how long it takes. We put the price in writing before any work begins, and you’ll get a live arrival time plus before-and-after photo updates as part of The Relay Visibility Guarantee. The work tells you everything. We just make sure it tells the right story. Call (341) 217-2776 to schedule your free estimate in Woodland Hills.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
