Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Woodland Hills Owner’s Guide
ActiveYards fence installation in Woodland Hills typically runs $3,500 to $9,000 for a full install, depending on linear footage, style, and site conditions. We stock genuine ActiveYards components and install them on a written, fixed price. If your existing ActiveYards section has a snapped rail, sagging gate, or posts pulling out of the ground, we can usually schedule the replacement within a few days of your call.
Most Woodland Hills owners discover they have a problem after a wind event or the first heavy rain of the season. A gate that dragged for months suddenly refuses to open. A section that always leaned slightly is now at a 10-degree tilt. The good news: ActiveYards uses a modular extrusion system, which means we can often replace a single failed section or post instead of redoing the entire run.
Which ActiveYards Models This Applies To
ActiveYards builds aluminum and steel fencing across four main series: the Classic, Original, Signature, and Grand. The most common installs we see in Woodland Hills are the Classic and Original aluminum lines for residential backyards, plus the Signature steel series for homeowners who want a heavier feel and more rigidity on sloped lots.
The compatibility gotcha with ActiveYards is the rail system. Older Classic series panels use a 2-inch wide top and bottom rail with square punched holes, while newer production runs switched to a reinforced rail profile that doesn’t accept the older brackets. If you’re replacing a single panel on a fence installed before roughly 2018, we need to confirm rail style before ordering. The part number is printed on a small sticker inside the top rail on most panels, but half the time it’s faded or missing on Woodland Hills fences after a few summers of direct sun. When that sticker is gone, we measure rail width, picket spacing, and the hole pattern to match the right series.
OEM vs aftermarket matters here. ActiveYards uses a powder-coat process that holds up well in our climate, but cheap aftermarket extrapolations from some online sellers don’t match the paint code. A slightly-off color on one section is more visible than you’d think, especially in direct Southern California light. We install OEM ActiveYards parts when replacing sections so the color and finish match the rest of the fence. Sawyer Remodel Woodland Hills is an independent contractor, not a franchise or factory branch of ActiveYards, but we source directly through authorized distribution so the warranty stays intact.
Styles & brands we work with
Signs Your ActiveYards Fence Installation Is Failing
- Gate drag or won’t latch. The gate post has shifted or the hinges have worn. In Woodland Hills clay soil, posts move more than people expect after wet winters followed by dry summers.
- Rail popped out of the post bracket. The screws backed out or the bracket cracked from repeated expansion and contraction. This is the most common ActiveYards failure we see.
- Leaning section with no broken parts. The post wasn’t set deep enough originally, or the footing is undersized for the wind load on that particular run.
- Pickets rattling or loose at the bottom. The bottom rail channel has worn or the picket screws have loosened. More common on older Classic series installs.
- White aluminum showing through the finish. The powder coat has failed. It starts as small chips at screw holes and spreads along the picket edges.
None of these are emergencies, but a leaning post puts strain on every connection point around it. What starts as one loose bracket becomes a snapped rail in the next Santa Ana wind event.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For ActiveYards fence installation in Woodland Hills, most of our quotes fall between $3,500 and $9,000 depending on scope. A single-section rail replacement with a service call runs at the bottom of that scale. A full 50 to 75 linear-foot tear-out and reinstall with new posts, concrete footings, and a new gate falls at the top.
Here’s how typical ActiveYards work breaks down:
- Single section or gate repair: $350 to $900 depending on which part failed and whether it’s a picket, rail, or post issue.
- 3-5 section replacement with new posts: $1,200 to $3,000 depending on post depth and access.
- Half-run replacement (25-40 linear feet): $2,500 to $4,500 including new concrete footings, leveling, and gate realignment.
- Full ActiveYards install (50+ linear feet with gate): $3,500 to $9,000 depending on series choice, slope, and existing fence removal.
Every quote includes the parts, labor, haul-away of the old fencing, and concrete work for the posts. We give you a written price before any work starts, and it doesn’t change unless the scope changes and you approve it in writing first. Workmanship carries the 365-Day Done Right Promise. If something fails within the first year, we fix it. No argument, no runaround.
DIY or Call Us?
You can safely do some diagnosis yourself. Look at the post bracket screws. Check whether the gate post wiggles when you push it. Note which sections lean and whether the ground around them has cracks. That’s all useful information to have when you call us.
Full post replacement is where DIY goes wrong. A post set too shallow in Woodland Hills soil will fail again within a year. You also need the concrete to cure properly around the new post before hanging a gate on it, and removing an old post from a tight corner against a retaining wall is not a weekend project. Aluminum fencing itself is low-risk compared to something like high-tension garage springs, so the danger here is mostly wasted time, wasted money, and a fence that looks worse than before. If you’ve tried patching it and it’s still sagging, call us at (341) 217-2776 and we’ll give you a straight answer on whether it’s a repair or a replacement.
FAQs
An ActiveYards aluminum or steel fence should last 25 to 35 years in Southern California when installed correctly. The failure point is almost always the post footing or the connection hardware, not the pickets or rails themselves. Gates tend to show wear first, usually within 8 to 12 years. If your fence is failing at the 10-year mark, it’s likely a post or bracket problem, not the material degrading. Call (341) 217-2776 and we’ll tell you what’s actually wrong.
It depends on what failed. Bent pickets, popped rails, and worn hinges can usually be repaired with OEM parts for far less than a full section replacement. A snapped rail or a cracked post means replacement of that section or post. We’ll tell you which one you’re looking at before we recommend spending money. Estimates are free.
Most single-section or gate repairs take half a day. A partial run replacement with new posts takes one to two days including concrete cure time before the panels are secured. A full install with old fence removal takes two to three days on a typical Woodland Hills lot.
We keep common Classic and Original series brackets, screws, and gate hardware on the truck for repair calls. Full panels and posts are ordered per job once we confirm the series and rail style, which usually takes a few business days. The one thing we won’t do is substitute an aftermarket part that doesn’t match your existing fence’s color or profile.
If you’re in Woodland Hills and tired of looking at a leaning gate or a rail that keeps popping out, call (341) 217-2776 for a free estimate. Luca and the crew at Sawyer Remodel Woodland Hills will give you a written price before any work starts. The work tells you everything. We just make sure it tells the right story.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
