Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Woodland Hills Owner’s Guide
Barrette kitchen remodeling in Woodland Hills typically costs between $14,000 and $45,000 for a full kitchen, depending on cabinet series, countertop material, and the condition of what’s behind the walls. We install Barrette-compatible kitchens and stock the hardware, hinges, drawer slides, and trim pieces that fail first, so most replacement parts get matched and installed in one visit. The way owners usually find us: a drawer that won’t close, a cabinet door that swings open on its own, or a hinge that snapped clean off after ten years of daily use.
Here’s the part nobody tells you about Barrette cabinetry: the boxes are built well, but the moving hardware takes a beating in Southern California. Dry air through the Santa Ana season, temperature swings between the Valley heat and air-conditioned interiors, and the simple reality of cooking three meals a day in a Woodland Hills household. The hardware goes first. The good news is you rarely need to replace a whole cabinet. You need the right part, matched to the right series, installed by someone who knows the difference.
Which Barrette Models This Applies To
Barrette cabinetry runs through several series lines, and the part you need depends on which one is in your kitchen. The most common lines we see in Woodland Hills homes are the stock and semi-custom Barrette series sold through regional suppliers, where hinges and drawer slides are either Blum-style soft-close or standard European cup hinges. If you’re not sure which one you have, open a cabinet door and look at the hinge cup: the stamp on the hinge arm tells you the manufacturer and sometimes the series code. For drawer slides, pull the drawer all the way out and look for a stamped number on the side rail.
The compatibility gotcha with Barrette is this: the same cabinet door can take a 35mm or 26mm hinge cup depending on year and series, and they are not interchangeable. Measure the cup hole in the back of the door before you buy anything. We stock OEM Barrette hardware where it’s still available, and for older series where original parts are discontinued, we carry quality aftermarket equivalents that match the door thickness and overlay. Some aftermarket hinges are actually an upgrade to soft-close if your originals were standard slam-shut style.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
- A drawer sticks halfway or needs a hard yank to open. The slide bearings have worn out or the rail is bent from years of weight. Forcing it works until it doesn’t, and then you have a drawer full of pots on the floor.
- A cabinet door won’t stay closed or hangs at an odd angle. The hinge spring or clip is done. You can adjust a hinge once or twice, but after that it’s a hardware replacement, not a fix.
- Soft-close doors slam shut instead of easing closed. The damper inside the hinge has failed. Individual dampers can be replaced, but if more than three or four have gone, it’s more economical to swap all the hinges on that cabinet row at once.
- Visible rust or green corrosion on hinges near the sink or dishwasher. Woodland Hills water is hard, and years of steam and mineral residue eat at plated hardware. Once the plating goes, the steel underneath rusts and the hinge seizes.
- Cabinet doors are visibly misaligned after a heat wave. Wood moves in California’s dry summer months. The door itself may be fine, but the hinge has shifted in its mounting holes, and adjusting it properly takes a jig, not a screwdriver and hope.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Let’s be straight about numbers. A full Barrette kitchen remodel in Woodland Hills runs $14,000 to $45,000 depending on cabinet series, countertop choice, and whether you’re moving plumbing or electrical. But if you’re here because a part failed, you’re probably not looking at a full gut. Here’s what the component-level work costs:
- Cabinet installation (full run of cabinets): $4,000 – $13,000
- Countertop installation (Barrette-compatible or new stone): $2,000 – $6,500
- Kitchen island installation (new island or island refresh): $3,000 – $10,000
- Backsplash installation (tile, stone, or Schluter-integrated): $800 – $2,500
- Individual hinge or drawer slide replacement: usually $45 – $150 per unit installed, parts included
Every estimate comes with a written price before we start. No surprises on the invoice. Parts and labor are itemized separately so you can see exactly what you’re paying for, and the work is covered under the 365-Day Done Right Promise. If something fails inside that year, we come back and make it right.
DIY or Call Us?
Some Barrette hardware replacements are genuinely doable for a competent homeowner. A single hinge swap with the same spec is a fifteen-minute job. Adjusting a drawer slide is another story: if the rail is bent or the mounting screws have stripped out of the cabinet box, you’ll need a filler repair before a new slide will sit square, and most people don’t have the right bit or the patience to do it twice.
Here’s where DIY goes wrong: forcing a misaligned drawer, stripping the cup hole in a cabinet door by using the wrong screw length, or buying a hinge with the wrong overlay and then drilling new holes into a door you can’t un-drill. If you’ve already made a few adjustments and things are still off, call (341) 217-2776. We’ll match the part, quote the job, and get it installed. The work tells you everything. We just make sure it tells the right story.
FAQs
Barrette cabinet boxes typically last 20 to 30 years in Woodland Hills homes, but hinges and drawer slides usually need replacement after 10 to 15 years of daily use, especially in kitchens near the dishwasher or in homes with hard water from city supply. Call (341) 217-2776 for a free estimate on replacing worn hardware before a failure turns into door and drawer damage.
Hinges and drawer slides are wear items, and once the internal spring or bearing fails, repair isn’t practical; the part gets swapped for a matching OEM or quality aftermarket replacement. In some cases we can rebuild a stripped hinge mount or reface a cabinet instead of replacing the whole box, which costs less than a full cabinet run. Call (341) 217-2776 and we’ll tell you what can be saved and what can’t.
Most single-part replacements take under an hour once we’re on site, and full kitchen remodels in Woodland Hills typically run 3 to 8 weeks depending on cabinet lead times, stone fabrication schedules, and whether we’re moving plumbing or electrical. We stock common Barrette-compatible hinges and slides on the truck so many part failures get resolved in the first visit. Call (341) 217-2776 to schedule a free estimate.
We stock common Barrette-compatible hinges, drawer slides, and trim pieces on our trucks, and for discontinued series we source OEM or equivalent aftermarket parts through our supplier network across the San Fernando Valley. You don’t need to hunt down parts yourself, and we’ll confirm the exact spec before we install. Call (341) 217-2776 for a free estimate.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
