Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Woodland Hills Owner’s Guide
CGI bathroom remodeling in Woodland Hills typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a single walk-in shower or gutting the entire bath down to the studs. We stock CGI-compatible vanity hardware, shower door rollers, valve trim kits, and drain assemblies on our trucks, so most replacement work starts the same day we show up.
The call usually starts the same way: the shower door won’t glide, the vanity drawer keeps sliding off its track, or a valve handle spins without turning the water on. You bought a home with CGI finishes, or you remodeled with them years ago, and now a part has failed. You need to know if it can be matched, what it costs, and how fast it gets fixed. That’s exactly what this page covers.
Quick take: Sawyer Remodel Woodland Hills is an independent remodeling contractor. We are not affiliated with CGI, but we work with their product lines regularly and source parts through established supply channels.
Which CGI Models This Applies To
CGI manufacturers a range of bathroom products, but the parts that fail most often come from their shower door systems, vanity lines, and tub hardware. If you have a CGI frameless shower enclosure, look for a small etched logo on the glass near the hinge or roller assembly. If you have a CGI vanity, the label is usually inside the top drawer, on the back panel, or under the sink basin. That label has the model number we need to pull the correct part.
Here’s the compatibility gotcha: CGI has changed shower door roller specs over the years. A roller from a 2016 enclosure will not always fit a 2021 rail system, even if the door looks the same. The wheel diameter, the bracket clearance, and the mounting screw position all differ. We measure the old part before ordering, every time. It saves you a second service visit and a restocking fee.
For OEM versus aftermarket: OEM CGI parts carry the exact spec match, but they can be slow to source and priced higher than the part’s manufacturing cost. Quality aftermarket shower rollers and door seals from suppliers in the San Fernando Valley often match or exceed OEM durability, especially for homes in Woodland Hills where hard water from the local supply accelerates mineral buildup on metal components. We’ll recommend the better option for your specific fixture, not the one that pads the invoice.
Styles & brands we work with
Signs Your CGI Bathroom Remodeling Is Failing
- Shower door drags or sticks along the track. The nylon wheels or bearings in the roller assembly are worn, or mineral deposits from Woodland Hills water have crusted the rail. Ignoring it damages both the roller and the track, which doubles the repair cost.
- Water seeps under the frameless enclosure. The bottom door seal has hardened or cracked. CGI seals are typically vinyl with a friction fit. Once they lose flexibility, water escapes onto the bathroom floor and into the subfloor over time.
- Vanity drawer fronts lean or drop when open. The drawer glides, usually a soft-close runner on CGI vanities, have a broken clip or a stripped mounting screw. Soft-close hardware that no longer catches is a classic sign the glide is shot.
- Shower valve handle spins or feels loose. The cartridge inside the valve body is worn, or the trim adapter has cracked. CGI valve trim uses a splined stem, and the plastic adapter can strip after years of mineral exposure and hand-tightening.
- Caulking pulls away from the vanity or tub surround. The silicone bead has reached the end of its life. In a climate like Woodland Hills with dry, hot summers and damp winters, expansion and contraction works caulk loose faster than you’d expect. It looks cosmetic, but it lets water in behind the vanity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CGI bathroom remodel in Woodland Hills runs $9,000 to $28,000. A small bathroom or a single walk-in shower replacement with CGI-compatible finishes falls between $4,500 and $12,000. Here’s how the major work breaks down:
| Project Scope | Price Range |
|---|---|
| Shower replacement with CGI-compatible hardware | $3,000 – $8,500 |
| Tub-to-shower conversion with CGI valve trim | $3,500 – $10,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Full bathroom remodel | $9,000 – $28,000 |
What drives the range more than anything else is the condition of the framing and waterproofing underneath. A 1970s-era Woodland Hills home may have water damage behind the shower walls that you can’t see until the tile comes off. We strip the demo layer, inspect, and show you photos of what we found before a single extra dollar gets spent. The written price goes first. The work follows the number you approved.
Every job we do carries our 365-Day Done Right Promise: if something isn’t right, we come back and make it right. No argument, no invoice. That’s a one-year warranty on labor, written into the project agreement.
DIY or Call Us?
You can safely replace a CGI bottom door seal yourself. Pull the old one off, clean the channel, press in the new seal. It takes ten minutes and costs under twenty dollars for the part. You can also swap a drawer glide if you’re comfortable with a Phillips screwdriver and a level.
Beyond that, call us. Shower door rollers involve tempered glass panels that weigh more than they look. A novice who loosens the wrong bracket can drop a $1,500 door onto the curb, the shower pan, or their own foot. Water supply work on a CGI valve means shutting off the water at the source, not just the fixture, and a botched cartridge pull can flood the bathroom into the hallway. The work tells you everything. We just make sure it tells the right story.
Call (341) 217-2776 and we’ll get you a written estimate before any tools come out.
FAQs
A properly built CGI bathroom remodel in Woodland Hills lasts 15 to 25 years before major components need replacement. Shower door seals and valve cartridges wear out in 5 to 10 years, especially with the hard water we deal with in the West Valley. The structural work, the tile, and the waterproofing last much longer when they’re installed right. Call (341) 217-2776 to have us assess your specific setup.
Shower door rollers and valve cartridges can sometimes be cleaned and reinstalled, but the repair rarely holds for more than a few months once the part shows wear. We’ll tell you straight up if a repair buys you time or just delays the inevitable. For an honest read on your fixture, call (341) 217-2776.
A single vanity install or shower door roller replacement is usually done in one visit. A full CGI bathroom remodel in Woodland Hills takes one to three weeks depending on demolition scope, fixture availability, and dry time for waterproofing membranes. We schedule the work and keep you updated with photo progress reports through The Relay Visibility Guarantee. Call (341) 217-2776 to set up a free estimate.
We keep common CGI-compatible hardware on our trucks: shower door rollers, bottom seals, handle sets, and drain assemblies. Model-specific parts like a full vanity front or custom glass panel get ordered through our supply channels. We also work with cabinetry and surfacing partners including KraftMaid, Cambria, and Silestone when a vanity or countertop needs matching. Call (341) 217-2776 and tell us your model number. We’ll check stock before you schedule.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
