Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Woodland Hills Owner’s Guide
KraftMaid roofing parts in Woodland Hills typically run $400 – $1,800 installed for repairs, and full replacements land between $8,000 and $20,000 depending on roof size and material. We keep common KraftMaid-compatible flashing, vent boots, and ridge cap stock on our trucks, so most calls in Woodland Hills turn into same-visit fixes. Most owners don’t wake up thinking about roofing parts. They notice a water stain on the ceiling after the first good rain, or they spot a shingle in the yard after a Santa Ana wind event, and suddenly the roof is the only thing on their mind.
Which KraftMaid Models This Applies To
KraftMaid is best known for cabinetry, but their roofing line shows up on a lot of Woodland Hills homes built from the early 2000s through the mid 2010s. The compatibility question almost always comes down to the roofing system, not a single model number. KraftMaid roofing was installed as a full assembly: underlayment, flashing profiles, vent boots, and shingle or tile surfaces sourced through regional suppliers. So when we talk about “KraftMaid roofing parts,” we’re usually matching the flashing specs, vent collar dimensions, and ridge cap profiles that were standard on those installs.
Here’s the gotcha most people hit: the original paperwork is long gone, and the roof has no visible branding. We identify the system by measurement. Vent pipe collars are either 1.5-inch, 2-inch, or 3-inch. Flashing comes in 4-inch, 5-inch, or 6-inch step profiles. Ridge cap comes in standard 12-inch widths. Bring us a photo of the failed part next to a tape measure and we can usually match it before we even pull up to the house. For KraftMaid-era systems specifically, we’ve found OEM-style galvanized flashing holds up better in Woodland Hills than thin aftermarket aluminum, which tends to corrode faster in the marine layer that rolls over the Santa Monica Mountains. We source OEM-spec parts where they matter and quality aftermarket where they perform the same for less.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
- Water stains on ceilings or upper walls. This is the classic first sign. It means water is getting past the roof surface somewhere, usually at a penetration point like a vent pipe, chimney, or valley. The stain often appears a few feet away from the actual leak because water runs along rafters before it drops.
- Granules collecting in gutters or at downspout bases. Asphalt shingles shed granules as they age. A little is normal. A steady stream of grit in the gutter every time it rains means the shingle surface is failing and UV exposure from long Woodland Hills summers is doing real damage.
- Curling, cracking, or missing shingles after wind events. The Santa Anas rip through the Valley a few times a year and they’re hard on roofing. Shingles that curl at the corners or crack when you look at them wrong are past their service life. Missing shingles are an open invitation for water.
- Rusted or lifted flashing around chimneys, skylights, and vent pipes. Flashing is the metal that seals roof penetrations. When it rusts or pulls away from the surface, water follows. This is the most common KraftMaid-era failure we see in Woodland Hills because the original flashing was often light-gauge galvanized steel that gives up after fifteen to twenty years.
- Daylight visible through the roof boards from the attic. Go up with a flashlight on a bright day. If you can see pinpoints of light through the sheathing, water can get in too. This is a late-stage sign and usually means the roof has been failing quietly for a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a KraftMaid-compatible roofing repair in Woodland Hills, expect $400 to $1,800 installed for the vast majority of part replacements: flashing, vent boots, ridge cap sections, or a handful of shingles. A full roof replacement on a typical Woodland Hills home runs $8,000 to $20,000 depending on square footage, pitch, tear-off requirements, and material selection.
What drives the range on repairs: single-story versus two-story access, how steep the roof is, how many layers of existing roofing we’re working through, and whether the decking underneath has rotted. A simple vent boot swap on a single-story rancher in the flats is a different job than flashing repair on a hillside home above Topanga Canyon Boulevard where we’re working off a steeper pitch. Every repair includes the part, the labor, and our written workmanship guarantee. You get the price in writing before we start, and the invoice matches the quote. No change orders because we found something unexpected. We tell you before we touch it.
DIY or Call Us?
You can safely do the detective work from the ground: check gutters for granules, look for missing shingles, photograph any visible damage. What you shouldn’t do is get on a roof without fall protection, and you definitely shouldn’t start pulling up flashing or prying off shingles if you’ve never done it. Roof work in Woodland Hills carries real risk: steep hillside pitches, slick morning dew from the marine layer, and the fact that most homeowner falls happen from single-story roofs, not dramatic heights. A bad flashing repair leaks worse than the original damage. A vent boot installed slightly off just moves the leak somewhere harder to find.
If you’re comfortable with a caulk gun and the repair is a small, visible surface crack, go ahead. If the problem involves water that’s already penetrated the roof deck, or the damage is within three feet of a chimney or valley, call (341) 217-2776. We’ll send someone who does this every day and the repair is guaranteed in writing.
FAQs
Most KraftMaid-era asphalt shingle roofs in Woodland Hills last 15 to 20 years before needing replacement, though the hotter, sun-exposed south-facing slopes often fail a few years before the rest. The intense UV exposure from long, dry summers breaks down shingle binders faster than the manufacturer’s national average would suggest, so a roof that’s “rated” for 25 years may realistically need attention by year 18. Tile and metal KraftMaid-era systems last significantly longer. If you’d like a roof condition assessment, call (341) 217-2776 and we’ll take a look at no charge.
Yes, if the damage is localized: a few missing shingles, one section of failed flashing, a cracked vent boot. These are textbook $400 to $1,800 repairs. If granule loss is widespread, shingles are curling across multiple roof planes, or water has been getting into the decking, patching becomes a game of whack-a-mole and replacement is the honest answer. The best way to know is to have someone who isn’t trying to sell you a roof look at it. Call (341) 217-2776 for a straight read on what you actually need.
Most single-part replacements, like flashing or a vent boot, take one to two hours on site. Repairs involving multiple penetrations or large sections of ridge cap can take a half day. We tell you before we start, and you get photo updates before and after the work so you can see exactly what was done without climbing up there yourself.
We stock the most common KraftMaid-compatible parts on our service trucks: standard flashing profiles, vent boots in all three common collar sizes, ridge cap, sealants, and matching shingle colors for the most popular Woodland Hills roof types. If we don’t have your exact part, we source it same week through our supplier network and the repair gets scheduled once the part is in hand. We work with KraftMaid-compatible systems as an independent provider alongside other brands we support, including Cambria, Silestone, and Kohler on the interior side. Call (341) 217-2776 and tell us what you’re looking at. We’ll match it before we roll.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
