Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Woodland Hills Owner’s Guide
Driveway and paver work around a Mighty Buildings structure in Woodland Hills typically runs $7,000 – $18,000 for a full paver driveway installation, with driveway replacement landing between $5,000 and $14,000 depending on square footage and substrate condition. We stock compatible pavers, edge restraints, and base materials on the truck, and most driveway tear-outs and repaves wrap up within three to five working days once we break ground. The usual discovery moment is not dramatic: a paver sinks after the winter rains, an edge row starts drifting into the planting bed, or a low spot pools water against the foundation and you start thinking about what that water is doing to the structure.
One thing worth saying up front: Sawyer Remodel Woodland Hills is an independent contractor, not affiliated with Mighty Buildings. We know their structures because we work around them in the West Valley, and because the driveway and paver issues we see are the same ones that show up on any slab-on-grade accessory structure in this climate: expansive clay soil, summer heat, and the occasional winter downpour that finds every weak edge.
Which Mighty Buildings Models This Applies To
Mighty Buildings homes and ADUs sit on engineered foundations, which means the driveway and paver connection points are more predictable than on a stick-built house, but they are not forgiving if the base fails. The pavers themselves are not a Mighty Buildings proprietary part. What matters is the interface: where the driveway meets the foundation edge, how drainage is sloped away from the panel base, and whether the original paver install included a proper compacted aggregate base or just sand on native soil.
The compatibility question is less about a model number and more about what is under the pavers. If your Woodland Hills Mighty Buildings lot was graded and paved as part of the original install, you likely have a 4-to-6-inch compacted base with a 1-inch sand setting bed. If it was added later by a previous owner or a contractor who cut corners, you might have pavers on 2 inches of sand over clay, and that is why they are moving. We identify the right fix by pulling a paver or two, measuring the base depth, and checking the edge restraint. OEM versus aftermarket does not really apply to pavers the way it does to a plumbing fixture. What matters is the paver thickness (60mm pedestrian, 80mm for any area that sees vehicle traffic), the base spec, and the joint sand. We stock 80mm Belgard and Calstone pavers as our default for driveways in this area, because 60mm pavers under a car will crack within a few years here.
Styles & brands we work with
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Sinking or depressed pavers near the foundation edge. This is almost always a base failure. Clay soil in Woodland Hills expands when wet and shrinks in summer, and a thin base cannot hold the load. The paver does not break; it just drops, and water follows the low spot toward the structure.
- Joint sand washing out after rain. If you see sand collecting at the bottom of the driveway after a storm, the joints are no longer locking the pavers. Left alone, the pavers start shifting under load and the edges creep outward.
- Edge rows separating or leaning into landscaping. The plastic or aluminum edge restraint was either never installed or has failed. Without a solid edge, pavers spread like a deck of cards under vehicle weight.
- Standing water against the Mighty Buildings foundation or panel base. Driveways should slope away at a minimum 2% grade. When pavers settle, that slope flattens or reverses. Water against the structure is the fastest way to compromise the panel base and invite moisture problems inside.
- Cracked or spalled pavers in the wheel path. This means the pavers are too thin for vehicle loads, or the base has voids under the surface. Either way, the fix is not sealing; it is removal and proper reinstallation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Woodland Hills, you are looking at these installed numbers, and we are not going to make you call just to get a ballpark:
- Paver driveway installation (new): $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement (tear-out and repave): $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What moves the number is square footage, access for equipment, the depth of the existing base you are tearing out, and whether we are hauling away old concrete or asphalt. Every quote includes removal, base prep, paver or surface material, edge restraint, joint sand, compaction, and cleanup. You get a written price before we start, and the number on that quote is the number on the invoice. No change orders because we hit a surprise. We walk the site first, note the base condition, and price it accurately. The work is covered by our 365-Day Done Right Promise: if it is not right, we come back and make it right, in writing.
DIY or Call Us?
You can safely do the inspection work. Pull a paver near a settling area, check the base depth, look at the edge restraint, and watch where water goes after a rain. That tells you a lot and costs you nothing. Where DIY goes sideways is the fix. Replacing a few pavers without addressing the base is a Band-Aid that fails within one rainy season in Woodland Hills. Compacting clay soil properly requires a plate compactor, the right aggregate, and someone who knows how to grade for drainage. And a driveway that drains toward a Mighty Buildings foundation is not an inconvenience; it is a structural problem that gets more expensive every year it is ignored. If you want a real fix, call (341) 217-2776. We will come out, measure, and give you a written price.
FAQs
A properly installed paver driveway on a compacted aggregate base lasts 25 to 30 years in our climate, with joint sand touch-ups every few years. A driveway installed on sand over native clay will show problems within 3 to 5 years. If yours is moving before the 10-year mark, the base was the issue, not the paver itself. Call (341) 217-2776 and we will confirm what is under your pavers.
Yes, if the failure is localized, like one edge or a small settled area. We can lift the affected pavers, re-compact the base in that section, and reset them. But if the base failure spans most of the driveway or the slope has flattened toward the structure, full replacement is the honest answer and the cheaper option over ten years. Estimates are free.
Most Mighty Buildings-adjacent driveway replacements in Woodland Hills take three to five working days, start to finish. Tear-out is usually a day, base prep and compaction a day, paver or surface install one to two days, and joint sand and final compaction a day. Weather can stretch that, but we will tell you the schedule before we start and keep you updated with photos.
We stock 80mm Belgard and Calstone pavers in common Woodland Hills colors, plus edge restraints, joint sand, and aggregate. We also have access to direct order any pattern or color you want. Unless you are set on a niche paver product, you will not need to order anything yourself. Call (341) 217-2776 and we will walk you through options and pricing.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
