Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Woodland Hills Owner’s Guide
Wellborn fence installation in Woodland Hills typically runs $3,500 to $9,000 fully installed, depending on linear footage, material grade, and whether we’re replacing a section or running a new line. We stock Wellborn-compatible fence materials and can usually be on-site within days, not weeks. Most owners discover a problem the hard way: a post leaning after rain, a gate that drags against the latch, or a panel that’s started to separate at the seam where Woodland Hills sun has cooked the original fasteners.
This page covers what fails on a Wellborn fence, what it costs to fix it right, and when a repair makes more sense than pulling the whole run out. If you’re standing in your backyard looking at a sagging section right now, skip to the cost section and call us at (341) 217-2776. We’ll put a written price in your hand before any work starts.
Which Wellborn Models This Applies To
Wellborn doesn’t manufacture fencing under a single product line the way they do cabinetry. What most Woodland Hills homeowners mean when they say “Wellborn fence” is a fence built with Wellborn-brand pressure-treated lumber, posts, or pre-assembled panels sourced through a local lumber yard or contractor. That matters because the part you need varies by what was originally installed. We’ve seen three common configurations in this area: 6-foot dog-ear cedar panels with Wellborn 4×4 posts, horizontal slat designs using Wellborn kiln-dried boards, and ranch-style split rail with Wellborn round posts.
Here’s the compatibility gotcha: Wellborn pressure-treated posts have a slightly different nominal dimension than big-box generic posts. The difference is small, usually an eighth of an inch, but it’s enough that a generic replacement post will leave a visible seam or throw a gate out of square. We measure on-site and match the actual dimension before we order anything. On the OEM-versus-aftermarket question, we default to Wellborn stock for visible structural pieces and use a quality aftermarket galvanized bracket for hardware, because the original Wellborn hardware was never designed for the salt-heavy moisture that comes up off the 101 corridor some mornings.
Styles & brands we work with
Signs Your Wellborn Fence Installation Is Failing
- Posts leaning at the base. This is almost always a below-grade failure: the original post wasn’t set deep enough, or water has been pooling around the concrete footing and rot finally took hold. In Woodland Hills, the wet-dry cycle from sprinkler overspray does more damage than rain ever will.
- Gate sagging or dragging. The hinge screws on Wellborn gates tend to strip out of the post over time because the original install used standard wood screws instead of through-bolts. Every sagging gate we see could have been prevented with a $12 hinge strap and a proper through-bolt.
- Panels separating at the picket seams. Southern California sun expands and contracts cedar more aggressively than most installers anticipate. If the original contractor didn’t leave a true expansion gap, the pickets push against each other and the seam opens up.
- Discoloration running up from the bottom rail. That’s moisture wicking. It means the fence is sitting too close to soil or irrigation heads are hitting the same spot every day. Cosmetic at first, structural eventually.
- Fasteners popping out along the top rail. Heat cycling works nails loose. Woodland Hills gets enough summer heat to do this in as little as five or six years, especially on south-facing runs along Topanga Canyon Boulevard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Wellborn fence installation in Woodland Hills runs $3,500 to $9,000 installed for a typical residential run. The spread comes down to three things: linear footage, whether we’re replacing an entire fence or just failed sections, and material grade. A 100-foot run of standard 6-foot cedars in the middle of that range. A shorter run with higher-end kiln-dried horizontal slats lands at the top. A section repair, where we cut out the bad and match the rest, is cheaper than a full line replacement.
Every quote includes parts, labor, haul-away of the old material, and a written price before we pick up a tool. The invoice you approve is the invoice you pay. One thing we insist on in Woodland Hills: we won’t set new posts with dirt backfill. That’s how the last fence failed. Concrete footings with proper drainage gravel, every time. Our 365-Day Done Right Promise covers the work for a full year. If something shifts, we come back and make it right.
DIY or Call Us?
You can safely check a few things yourself before deciding: whether the post itself is cracked or just the concrete cap, whether the gate hinges are pulling from the post or the frame, and whether any boards near the ground feel spongy when you press them. Those observations help you describe the problem accurately when you call.
Here’s what we’d caution against. Digging out a failed post in Woodland Hills clay is miserable work, and if the fence shares a property line, you’re legally required to coordinate with your neighbor. Setting a post wrong is the number one reason we get called back to replace a fence someone else “fixed” 18 months earlier. If you want to try the repair yourself, we respect that. If you’d rather have it done once and know the price before work starts, call (341) 217-2776. We’ll send a tech who measures, prices it in writing, and gets it done right.
FAQs
How long should a Wellborn fence last in Woodland Hills? A correctly installed Wellborn cedar fence should last 15 to 20 years in our climate, with the caveat that south and west-facing runs get significantly more sun damage and may need board replacement around year 10. The parts that fail first are the below-grade post sections and the hardware.
Can you repair my Wellborn fence instead of replacing it? Yes, and we recommend it if the failure is limited to a section, a gate, or a few posts. We evaluate the whole run and tell you honestly whether a repair buys you five more years or whether you’re patching a fence that’s already past its useful life.
How long does a section replacement take? Most section replacements in Woodland Hills are done in one day, including setting new posts and hauling away old material. A full fence line usually takes two to three days depending on terrain and access.
Do you stock Wellborn-compatible materials or do you order per job? We stock common Wellborn post dimensions and standard 6-foot panel materials on the truck for section repair. For specific styles or full-line replacements, we order from our lumber partner for next-week delivery. Call (341) 217-2776 and we’ll tell you what we have on hand right now.
Written by Luca Romano, Owner, Sawyer Remodel Woodland Hills at Sawyer Remodel Woodland Hills, serving Woodland Hills and nearby areas.
